August 2005

I'm continuing to part out the car. Today I began by removing the floor of the front trunk.

Next, I removed the factory front sway-bar.

Next removed was the rear section of the rear trunk floor.

The next section removed was the passenger's front fender.

This shows the blocks of wood I used to prop up the front trunk, before I removed it.

This is a shot of the front trunk removed.

Here's the front trunk on the ground. The parts between the trunk and the car is the 2 doors.

This shows where I removed the section of the floor where the pedal cluster is mounted.

This is a shot of the rear trunk removed.

Here's the rear trunk on the ground.

This is a shot after cleaning up all of the removed parts.

Here's a side shot. Hey, maybe this is a canidate for a tube car?

This is a shot after cutting the pieces small enough to haul off to a dumpster.

Here's another side shot.