December 2004

I've decided to part this car out, it's too far gone to spend the time putting it back together. This is the before shot. I used a sawzall, tin snips and a cutting wheel to remove. I cut beyond where the fender attaches so that I can sell and someone else can use on their car.

This is the outside shot.

This is the inside shot.

Here's the end view where the fender attaches at the door hinge.

This is the front view.

This is the side view after the fender was removed.

This shows the inside view at the headlight bucket.

This is the inside view at the fuel tank/firewall area.

This is the front view.

This is the door hinge view.